Products
Piezo Actuators
Nanopositioning & Scanning Systems
Active Optics /
Steering Mirrors
Capacitive Position Sensors
Piezo Drivers & Nanopositioning Controllers
Hexapods /
Motorized Positioners
Photonics Alignment Solutions
Motion Controllers
Ceramic Linear Motors & Stages
Search Catalog
By Keyword
By Item #
All Categories
NanoCube® Piezo Controller
All Categories
>
Nanopositioning: Piezo Stages,
Actuators, Piezo Controllers, Sensors
>
Piezo drivers, Controllers, Power Amps
>
3-Channel Nanocube Controllers
>
Item # E-664.S3
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # E-664.S3, NanoCube® Piezo Controller
larger image
3 x 14 W Peak Power
Position Servo-Control
For P-611 NanoCube® NanoPositioning Systems
Specifications
Sensor Type
Strain Gauge
Channels
3
Output Voltage
-20 to +120
V
Max. Output Power
14 W / Channel
Dimensions
236 x 88 x 273 mm + handles
Operating Voltage
90 - 120 VAC, 50-60 Hz (linear P/S)
220 - 240 VAC, 50-60 Hz (linear P/S)
Function
Power Amplifier & Sensor/position Servo-control Of P-611 Nanocube® Nanopositioning Systems
Average Output Power
6 W / channel
Peak Output Current <5 ms
140 mA / Channel
Average Output Current >5 ms
60 mA / Channel
Current Limitation
Short-Circuit Proof
Voltage Gain
10 ±0.1
Polarity
Positive
Control Input Voltage
-2 to +12
V
DC-Offset Setting
0 to 100 V with 10-turn pot
Input Impedance
100
kO
Display
3 x 3 1/2 -digit, LED
Control Input Socket
3 x BNC (rear)
PZT Voltage Output Socket
25 Pin Sub-D On Rear
Servo Characteristics
P-I (analog) + Notch Filter
Sensor Socket
25 Pin Sub-D on Rear (Same as PZT Voltage)
Sensor Monitor Output Socket
3 X BNC on Rear
Additional I/O
14 pin connector on rear for On-Target and Overflow status and control in and sensor monitor out
CADs & Drawings, Manuals, Videos, Specs
CADs & Drawings, Manuals, Videos, Specs
© 1996-2020 PI (Physik Instrumente) GmbH & Co. KG. All rights reserved. Specifications subject to change without notice.
