• For High- and Low-Voltage Piezo Systems
• 19- and 9.5-Inch Chassis
• Optional Position Servo-Control Modules
• Optional Display and RS-232 & IEEE 488 Interface Module

• Position Servo-Control for Piezo-Driven Nanopositioning Systems
• Improves Linearity
• Eliminates Drift & Hysteresis
• For Capacitive Sensors, Strain Gauge Sensors & LVDT Sensors
• Increases Piezo Stiffness
• Notch Filter for Improved Dynamics

• High-Power Module with 1100 V Voltage Range, for the E-500 Piezo Controller System
• Module for E-500 piezo controller rack
• E-508.OE for switching applications
• Position control (optional)
• Interface / display modules (optional)

The E-508 high-power amplifier for PICA high-voltage piezo actuators (HVPZT) is a plug-in module for the E-500 piezo controller system. This low-noise amplifier can output and sink a peak current of 50 mA (E-508.OE: up to 400 mA) in an 1100 V range. E-508 systems offer precision control of piezo actuators and piezo positioning systems both in closed-loop and voltage-controlled operation.

Voltage controlled piezo positioning
In open-loop operation, the output voltage is determined either exactly by manually using a 10-turn DC-offset potentiometer or directly by using an analog signal. Open-loop operation is ideal for applications where fast response times and very high resolutions are essential at maximum bandwidth. The specification or position feedback in absolute values is either not significant or is done by an external servo loop.

• For the Modular E-500 Motion Controller System
• Low-noise 20-bit D/A and A/D transducer
• Wave generator with programmable trigger inputs and outputs
• Plug-in module for E-500 piezo system

Interface and function module for piezo-based positioning systems
Interface module for digital control of the closed-loop analog E-500 motion control system. Availability of digital functions such as wave generator or data recorder.

Interfaces
Commanding via TCP/IP, USB, and RS-232 interfaces. Digital inputs and outputs for automation.

Extensive functions, software support
Powerful macro command language. Nonvolatile macro storage, e.g., for stand-alone operation with autostart macro. Data recorder. Wave generator. Extensive software support, e.g., for LabVIEW, C, C++, MATLAB, Python. PIMikroMove user software.

• 200 W Peak Power
• Output Voltage Range -20 to +120 V
• E-505.00S with one fixed voltage of +100 V

• 3 x 14 W Peak Power
• Output Voltage Range -20 to +120 V
• E-503.00S with 2 amplifier channels and one fixed voltage of +100 V