PI - Motion Control & Nanopositioning Solutions

Piezo Actuators
Nanopositioning & Scanning Systems
Active Optics /
Steering Mirrors
Capacitive Position Sensors
Piezo Drivers & Nanopositioning Controllers
Hexapods /
Motorized Positioners
Photonics Alignment Solutions
Motion Controllers
Ceramic Linear Motors & Stages


Search Catalog
      GO   
 All Categories    A-82x PIglide Motion Controllers for 4, 6 or 8 Axes
All Categories > Micropositioning:
Motorized Stages, Hexapods, Controllers
> Motion Controllers for Micropositioning Systems > A-82x PIglide Motion Controllers for 4, 6 or 8 Axes > View Items
 
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

A-82x PIglide Motion Controllers for 4, 6 or 8 Axes

Check up to five results to perform an action.


For Stages with Direct Drive and High Power Requirements, TCP/IP Interface

4, 6 or 8 high-performance motion axes

Fully integrated closed-loop servo control, amplifier module, and power supplies

For voice coil drives, DC motors, and brushless 3-phase motors

Quiet PWM drives. Optional: NanoPWM high-performance drive control

Encoder inputs support sine/cosine and BiSS-C

The A-82x motion controller series from PI offers a fully integrated electronics solution with controller, drives, and power supplies in a compact 4-U-high 19-inch rack unit. The A-82x controllers are designed and optimized for PIglide air bearing stages that are equipped with direct drive linear and rotation servo motors, and high-resolution encoders. The A-82x motion controller features the state-of-the-art ACS SPiiPlusEC motion controller and EtherCAT master.

Standard options include inputs for incremental sine/cosine and absolute encoders that use the BiSS-C data protocol. Support for sine/cosine encoders has an integrated interpolation factor of 16384x. All controllers feature integrated flash memory for stored motion programs and parameters.

The A-82x controllers can be operated in stand-alone mode running stored programs, or controlled via an external PC. A PC is required for programming and startup. All software is supplied with the controller.

If the controller is purchased together with a PIglide air bearing stage or positioning system, PI will perform the servo tuning, startup of the controller, and error calibration, and supply a complete ready-to-use positioning system.

The NanoPWM technology from ACS is integrated into the A-824.2Nx00 models. They offer the best possible solution for demanding positioning applications: Subnanometer position holding, tracking errors limited to a few nanometers, optimal velocity constancy. NanoPWM are a genuine alternative to linear drives: Comparable performance at a lower price with less space required for the overall system.




Compare Items
   
  Results 1 - 4 of 4 1 

Item #

Item Name

Number of Drive Axes

Servo Frequency Position Control

Output Current (Per Axis)

Total Output Power (Continuous Operation)

A-824.21x00 A-82x PIglide Motion Controllers for 4, 6 or 8 Axes 4 10 kHz 10 A Continuous Operation
20 A Peak (<1 s)
1100 W
A-824.2Nx00 A-82x PIglide Motion Controllers for 4, 6 or 8 Axes 4 10 kHz 20 A Peak (<1 s)
6.6 A Continuous Operation
1500 W
A-826.21x00 A-82x PIglide Motion Controllers for 4, 6 or 8 Axes 6 10 kHz 10 A Continuous Operation
20 A Peak (<1 s)
1500 W
A-828.21x00 A-82x PIglide Motion Controllers for 4, 6 or 8 Axes 8 10 kHz 10 A Continuous Operation
20 A Peak (<1 s)
1500 W
  Results 1 - 4 of 4 1 


© 1996-2020 PI (Physik Instrumente) GmbH & Co. KG. All rights reserved. Specifications subject to change without notice.