PI - Motion Control & Nanopositioning Solutions

Piezo Actuators
Nanopositioning & Scanning Systems
Active Optics /
Steering Mirrors
Capacitive Position Sensors
Piezo Drivers & Nanopositioning Controllers
Hexapods /
Motorized Positioners
Photonics Alignment Solutions
Motion Controllers
Ceramic Linear Motors & Stages


Search Catalog
      GO   
 All Categories    High-Resolution Stepper-Mike Actuators
All Categories > Micropositioning:
Motorized Stages, Hexapods, Controllers
> Micropositioning Actuators / Stages > Actuators & Micrometers > High-Resolution Stepper-Mike Actuators > Item # M-168.52S
 
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # M-168.52S, High-Resolution Stepper-Mike Actuators



  • 10, 25 & 50 mm Travel Ranges
  • Resolution <0.1 µm
  • 2- and 5-Phase Stepper Motor
  • Manual Positioning Knob
  • Sub-nm Resolution with Optional PZT Actuator
  • >5,000 Hours MTBF




 Specifications   

Travel Range

50 mm

Min. Incremental Motion

0.05 µm

Max. Push Force

50 N

Max. Speed

5.0 mm/s

Design Resolution

0.025 µm

Unidirectional Repeatability

0.1 µm

Max. Pull Force

50 N

Backlash

2 µm

Max. Lateral Force (at Tip)

0.02 N

Motor Resolution

20000 steps/rev. (2-phase stepper, 24 V chopper voltage, max. 0.8 A / phase, 20,000 microsteps with C-600, C-630 controllers)

Drive Screw Pitch

0.5 mm

Motor Type

2-phase stepper (24 V chopper voltage, max. 0.8 A / phase, 20,000 microsteps with C-600, C-630 controllers)

Weight

0.5 kg

Recommended Motor Controller

C-600, C-630


 CADs & Drawings, Manuals, Videos, Specs 

Get Information




© 1996-2020 PI (Physik Instrumente) GmbH & Co. KG. All rights reserved. Specifications subject to change without notice.