PI - Motion Control & Nanopositioning Solutions

Piezo Actuators
Nanopositioning & Scanning Systems
Active Optics /
Steering Mirrors
Capacitive Position Sensors
Piezo Drivers & Nanopositioning Controllers
Hexapods /
Motorized Positioners
Photonics Alignment Solutions
Motion Controllers
Ceramic Linear Motors & Stages

Tech blog
Videos
News

Search Catalog
      GO   
 All Categories    LVPZT Piezo Amplifier & Servo-Controller Module with High-Speed RS-232 Interface
All Categories > Nanopositioning: Piezo Stages,
Actuators, Piezo Controllers, Sensors
> Piezo drivers, Controllers, Power Amps > Single Channel Controllers / Amplifiers / Cards > LVPZT Piezo Amplifier & Servo-Controller Module with High-Speed RS-232 Interface > Item # E-665.LR
 

Item # E-665.LR, LVPZT Piezo Amplifier & Servo-Controller Module with High-Speed RS-232 Interface


    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Integrated High-Speed RS-232 Interface & 20-bit DAC
  • Network Capability with up to 12 Channels
  • Piezo Driver with 36 W Peak Power
  • SGS, LVDT and Capacitive Sensor Servo-Control
  • Table for User-Defined Curves
  • GCS (General Command Set) Compatible
  • UL and CSA certified




 Specifications   

Sensor Type

LVDT

Channels

1

Output Voltage

-20 to +120 V

Average Output power

12 W

Max. Output power

36 W

Function

Amplifier and position servo-controller for LVPZT with analog and digital interface

Current Limits

Short-Circuit Proof

Polarity

Positive

Input Impedance

100

Dimensions

236 x 88 x 273 mm + handles

D/A Converter

20-bit resolution

Baud Rate

9.6 - 115.2 kBaud

Wave Table

64 Data Points, 100 Hz, External Triggering

Sensor Connector

LEMO ERA.0S.304.CLL

Weight

2.5 kg

Operating Voltage

90 - 120 VAC, 50-60 Hz (analog PS)
220 - 240 VAC, 50-60 Hz (analog PS)

Input Control Voltage

14 V Active Swing, Shiftable in -12 to +12 V

DC-Offset Setting

0 to 100 V at Output with 10-turn Potentiometer

Control IN Socket

BNC

Piezo Output Connection

LEMO ERA.00.250.CTL

Display

2 x 4 1/2-digit, LED

Peak Current <5 ms

360 mA

Average Current >5 ms

120 mA

Voltage Amplification

10 ±0.1

Network Capability

Up to 12 Channels, Parallel

Servo Features

P-I (Analog) + Notch Filter

Sensor Monitor Connection

BNC


 MORE IMAGES 

·  4 x E-621 in an E-501.621 Chassis

·  Open-Loop Frequency with Various PZT Loads


 DOWNLOADS 

General Command Set (GCS)

Description/Datasheet

Description / Datasheet / Order Info




© 1996-2018 PI (Physik Instrumente) GmbH & Co. KG. All rights reserved. Specifications subject to change without notice.