PI - Motion Control & Nanopositioning Solutions

Piezo Actuators
Nanopositioning & Scanning Systems
Active Optics /
Steering Mirrors
Capacitive Position Sensors
Piezo Drivers & Nanopositioning Controllers
Hexapods /
Motorized Positioners
Photonics Alignment Solutions
Motion Controllers
Ceramic Linear Motors & Stages

Tech blog
Videos
News

Search Catalog
      GO   
 All Categories    High-Power HVPZT Piezo Amplifier / Controller with Energy Recovery
All Categories > Nanopositioning: Piezo Stages,
Actuators, Piezo Controllers, Sensors
> Piezo drivers, Controllers, Power Amps > High-Power Amplifiers 500 to 2000 W > Item # E-480.00
 

Item # E-480.00, High-Power HVPZT Piezo Amplifier / Controller with Energy Recovery


    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • 2000 W Peak Power
  • Energy Recovery
  • Output Voltage 0 to ±1000 V and bipolar
  • Optional Position Servo-Controller Module
  • Optional Computer Interface and Display Module
  • Differential Output




 Specifications   

Channels

1

Operating Temperature Range

+5 to +50 °C

Output Voltage

0 - 1000 V

Max. Output power

2000 W

Weight

8.6 kg

Input Impedance

100

Peak Current <50 ms

2000 mA

Average Output Power

Equivalent to 630 W Reactive Power

Output Voltage

1000-Volt Swing, Not Floating, (Settable as: 0 to -1000 V; -750 to +250 V; -500 to +500 V; -250 to +750 V or 0 to +1000 V; Measured on Line to PZT)

Function

Power Amplifier with Servo-Controller, Display and Computer Interface Options

Average Current >50 ms

100 mA

Small-Signal Bandwidth

5 kHz (660 nF); 1 kHz (3.4 µF)

Large-Signal Bandwidth

1.4 kHz (660 nF); 350 Hz (3.4 µF)

Current Limits

Short-Circuit Proof

Voltage Gain

100 (Polarity depends on Factory Settings)

Polarity

Negative / Positive / Bipolar; Differential. Depends on Connector Pin Assignment

Input Control Voltage

10 V Active Swing, Not Floating but can be Set/Shifted to Anywhere in -10 to +10 V; Max. Rating: ±12 V

Ripple

<0.3 % (Depends on Voltage Range and Piezo Capacitance)

DC-Offset Setting

0 to 100 % of Selected Output Range by 10 turn, Front-Panel Potentiometer

Control IN Socket

BNC

Piezo Output Connection

LEMO FGG.1B.304.CLAM31

Dimensions

450 x 132 x 296 mm + Handles

Operating Voltage

90 - 120, 50-60 Hz
210 - 250 VAC, 50-60 Hz


 MORE IMAGES 

·  Open-Loop Frequency with Various PZT Loads


 DOWNLOADS 

Description / Datasheet / Order Info




© 1996-2017 PI (Physik Instrumente) GmbH & Co. KG. All rights reserved. Specifications subject to change without notice.